Akulon Fuel Lock
Brand information
In the 1990s, stricter guidelines for reducing the evaporative emissions of small off-road equipment were instituted by the California Air Resources Board (CARB) and the Environmental Protection Agency (EPA). With other countries preparing to follow suit, Envalior saw an opportunity to make an environmental impact in the outdoor power equipment (OPE) industry, leading to the 2011 launch of our Fuel Lock products.
Today, leading global manufacturers have trusted Akulon for years, and the third-generation technology continues to deliver superior performance versus HDPE.
Key Benefits
- Tanks with 2 mm wall thickness molded from Akulon Fuel Lock perform at exceptionally low evaporative emission rate of 80% below the U.S. EPA and CARB regulation limits
- Supports sustainable practices by avoiding fluorination, a traditional barrier technology for high-density polyethylene (HDPE)
- High impact resistance at cold temperature to -40°C
- Offers the ability to design thinner-wall fuel tanks that reduce weight material while increasing fuel capacity
- Utilizes standard injection molding and blow molding tools and machines
Benefits
Akulon® Fuel Lock PA6 allows for reliable solutions due to good UV-stability and excellent barrier to evaporative emissions compared to fluorinated HDPE.
Akulon® Fuel Lock PA6 allows for cost effective solutions due to increased design freedom (minimum wall thickness possible up to 1.2mm).
Details
Akulon® Fuel Lock is a proven and superior alternative to Fluorinated HDPE. It enables redesigned fuel tanks with thinner walls, lowering systems costs and weight and an excellent barrier to evaporative emissions (more than six times higher than the regulations require), and guaranteed to last for the lifetime of the product.
Benefits
Akulon® Fuel Lock PA6 allows for lightweight solutions compared to metals.
Akulon® Fuel Lock PA6 allows for reliable solutions due to its low permeability performance againt CNG, its high impact resistance down to -60°C, its high elongation down to -60°C.
Akulon® Fuel Lock PA6 allows for cost effective solutions due to its good processability.
Details
Akulon® Fuel Lock is used as liner material in low weight, high pressure Type IV composite tanks providing excellent permeability whilst being 70% lighter than conventional steel tanks. Akulon® Fuel Lock is a proven and superior alternative to Fluorinated HDPE that enables our customers to get the best of both worlds: Redesigned fuel tanks with thinner walls, lowering systems costs and weight and an excellent barrier to evaporative emissions (more than six times higher than the regulations require), and guaranteed to last for the lifetime of the product.
Akulon Fuel Lock products
